Paddock lifts and bobbins

Nuda900Rsweden
Posts: 53
Joined: Fri Jun 13, 2014 6:27 pm
Location: Sweden

Re: Paddock lifts and bobbins

Post by Nuda900Rsweden » Wed Nov 26, 2014 9:19 am

I got the Bursig with the Nuda adaptor, new from Bursig, and I just love it!!
One thing though, I had to (don't know if the rest of you that have it had to do this) grind down the white plastic fit/mount just a bit for it to fit better. It was an easy thing to do and I can post a pic if you want but I'm in Brazil at the moment and will not be back home for another two weeks.

Cheers!

User avatar
Waynus
Posts: 846
Joined: Tue May 21, 2013 8:42 pm
Location: belgium

Re: Paddock lifts and bobbins

Post by Waynus » Wed Nov 26, 2014 11:43 am

Mine came with a small piece cut out of the top / front part of the white cylinder.
I hereby swear to almighty Goddess Nuda that I will ride her as hard as I can and have all things needed to keep her running in peak form taking me to new heights everyday. Amen.

Nuda900Rsweden
Posts: 53
Joined: Fri Jun 13, 2014 6:27 pm
Location: Sweden

Re: Paddock lifts and bobbins

Post by Nuda900Rsweden » Wed Nov 26, 2014 6:36 pm

Thats's probably the way it should come. I had a few moments of ??? before I got it that it had to be slightly modified to fit the way it should.

Besides that little thing I am really impressed by the Bursig stand.

clik
Posts: 664
Joined: Mon Sep 29, 2014 5:05 am
Location: Scotland + CYPRUS

Re: Paddock lifts and bobbins

Post by clik » Wed Nov 26, 2014 6:59 pm

i would like to see a photo of the part you have cut out or modified
to see if mine is the same or needing to be trimmed :?:

User avatar
Juvkam
Posts: 107
Joined: Tue Nov 11, 2014 2:14 pm
Location: Norway

Re: Paddock lifts and bobbins

Post by Juvkam » Fri Nov 28, 2014 11:42 am

Just ordered the Nuda and myselfe a christmaspresent, guess what? Yep, a Bursig Racing stand :mrgreen:
Juvkam
2013 Nuda 900R

Nuda900Rsweden
Posts: 53
Joined: Fri Jun 13, 2014 6:27 pm
Location: Sweden

Re: Paddock lifts and bobbins

Post by Nuda900Rsweden » Thu Dec 11, 2014 10:34 pm

clik wrote:i would like to see a photo of the part you have cut out or modified
to see if mine is the same or needing to be trimmed :?:

Here are some pics Clik. The white plastic piece on the Bursig stand has to be ground down a little to fit. If you don't there is a risk one damages the clutch bracket.
Attachments
image.jpg
image.jpg (517.6 KiB) Viewed 5155 times
image.jpg
image.jpg (646.99 KiB) Viewed 5155 times
image.jpg
image.jpg (1.02 MiB) Viewed 5155 times
image.jpg
image.jpg (867.37 KiB) Viewed 5155 times
image.jpg
image.jpg (855.76 KiB) Viewed 5155 times

Post Reply